Name : S32K118
Flash : 288 kB
Flash bank : 0x40000 Bytes @ 0x0
Flash bank : 0x8000 Bytes @ 0x10000000
RAM : 23 kB
RAM : 0x00005C00 Bytes @ 0x00005C00
description : S32K118 NXP Microcontroller
Architecture : ARM Cortex-M0+ (CM0PLUS)
revision : r0p0
endian : little
Number of relevant bits in Interrupt priority : 2
name : ADC0
description : Analog-to-Digital Converter
base address : 0x0
Interrupt (28) ADC0
name : AIPS
description : AIPS-Lite Bridge
base address : 0x0
name : CAN0
description : Flex Controller Area Network module
base address : 0x0
Interrupt (10) CAN0_ORed_Err_Wakeup
Interrupt (11) CAN0_ORed_0_31_MB
name : CMP0
description : High-Speed Comparator (CMP), Voltage Reference (VREF) Digital-to-Analog Converter (DAC), and Analog Mux (ANMUX)
base address : 0x0
Interrupt (29) CMP0
name : CMU_FC_0
description : CMU_FC
base address : 0x0
name : CMU_FC_1
description : CMU_FC
base address : 0x0
name : CRC
description : Cyclic Redundancy Check
base address : 0x0
name : CSE_PRAM
description : CSE_PRAM
base address : 0x0
name : DMA
description : Enhanced Direct Memory Access
base address : 0x0
Interrupt (0) DMA0
Interrupt (1) DMA1
Interrupt (2) DMA2
Interrupt (3) DMA3
Interrupt (4) DMA_Error
name : DMAMUX
description : DMA channel multiplexor
base address : 0x0
name : EIM
description : Error Injection Module
base address : 0x0
name : ERM
description : ERM
base address : 0x0
Interrupt (5) ERM_fault
name : FLEXIO
description : The FLEXIO Memory Map/Register Definition can be found here.
base address : 0x0
Interrupt (25) FLEXIO
name : FTFC
description : FTFC
base address : 0x0
Interrupt (18) FTFC
name : FTM0
description : FlexTimer Module
base address : 0x0
Interrupt (12) FTM0_Ch0_7
Interrupt (13) FTM0_Fault
Interrupt (14) FTM0_Ovf_Reload
name : FTM1
description : FlexTimer Module
base address : 0x0
Interrupt (15) FTM1_Ch0_7
Interrupt (16) FTM1_Fault
Interrupt (17) FTM1_Ovf_Reload
name : LMEM
description : Local Memory Controller
base address : 0x0
name : LPI2C0
description : The LPI2C Memory Map/Register Definition can be found here.
base address : 0x0
Interrupt (24) LPI2C0_Master_Slave
name : LPIT0
description : Low Power Periodic Interrupt Timer (LPIT)
base address : 0x0
Interrupt (20) LPIT0
name : LPSPI0
description : The LPSPI Memory Map/Register Definition can be found here.
base address : 0x0
Interrupt (26) LPSPI0
name : LPSPI1
description : The LPSPI Memory Map/Register Definition can be found here.
base address : 0x0
Interrupt (27) LPSPI1
name : LPTMR0
description : Low Power Timer
base address : 0x0
Interrupt (8) LPTMR0
name : LPUART0
description : Universal Asynchronous Receiver/Transmitter
base address : 0x0
Interrupt (31) LPUART0_RxTx
name : LPUART1
description : Universal Asynchronous Receiver/Transmitter
base address : 0x0
Interrupt (30) LPUART1_RxTx
name : MCM
description : Core Platform Miscellaneous Control Module
base address : 0x0
name : MPU
description : Memory protection unit
base address : 0x0
name : MSCM
description : MSCM
base address : 0x0
name : MTB_DWT
description : MTB data watchpoint and trace
base address : 0x0
name : PCC
description : PCC
base address : 0x0
name : PDB0
description : Programmable Delay Block
base address : 0x0
Interrupt (19) PDB0
name : PMC
description : PMC
base address : 0x0
Interrupt (21) SCG_CMU_LVD_LVWSCG
name : PORTA
description : Pin Control and Interrupts
base address : 0x0
name : PORTB
description : Pin Control and Interrupts
base address : 0x0
name : PORTC
description : Pin Control and Interrupts
base address : 0x0
name : PORTD
description : Pin Control and Interrupts
base address : 0x0
name : PORTE
description : Pin Control and Interrupts
base address : 0x0
name : PTA
description : General Purpose Input/Output
base address : 0x0
name : PTB
description : General Purpose Input/Output
base address : 0x0
name : PTC
description : General Purpose Input/Output
base address : 0x0
name : PTD
description : General Purpose Input/Output
base address : 0x0
name : PTE
description : General Purpose Input/Output
base address : 0x0
name : RCM
description : Reset Control Module
base address : 0x0
Interrupt (23) RCM
name : RTC
description : Secure Real Time Clock
base address : 0x0
Interrupt (6) RTC
Interrupt (7) RTC_Seconds
name : S32_NVIC
description : Nested Vectored Interrupt Controller
base address : 0x0
Interrupt (0) DMA0
Interrupt (1) DMA1
Interrupt (2) DMA2
Interrupt (3) DMA3
Interrupt (4) DMA_Error
Interrupt (5) ERM_fault
Interrupt (6) RTC
Interrupt (7) RTC_Seconds
Interrupt (8) LPTMR0
Interrupt (9) PORT
Interrupt (10) CAN0_ORed_Err_Wakeup
Interrupt (11) CAN0_ORed_0_31_MB
Interrupt (12) FTM0_Ch0_7
Interrupt (13) FTM0_Fault
Interrupt (14) FTM0_Ovf_Reload
Interrupt (15) FTM1_Ch0_7
Interrupt (16) FTM1_Fault
Interrupt (17) FTM1_Ovf_Reload
Interrupt (18) FTFC
Interrupt (19) PDB0
Interrupt (20) LPIT0
Interrupt (21) SCG_CMU_LVD_LVWSCG
Interrupt (22) WDOG
Interrupt (23) RCM
Interrupt (24) LPI2C0_Master_Slave
Interrupt (25) FLEXIO
Interrupt (26) LPSPI0
Interrupt (27) LPSPI1
Interrupt (28) ADC0
Interrupt (29) CMP0
Interrupt (30) LPUART1_RxTx
Interrupt (31) LPUART0_RxTx
name : S32_SCB
description : System Control Registers
base address : 0x0
name : S32_SysTick
description : System timer
base address : 0x0
name : SCG
description : System Clock Generator
base address : 0x0
Interrupt (21) SCG_CMU_LVD_LVWSCG
name : SIM
description : System Integration Module
base address : 0x0
name : SMC
description : System Mode Controller
base address : 0x0
name : TRGMUX
description : TRGMUX
base address : 0x0
name : WDOG
description : Watchdog timer
base address : 0x0
Interrupt (22) WDOG
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.